1-1/4 inch 1.25" NPT 2 Way 12VDC Brass Reverse Polarity 2 Wires On/Off Motorized Electrical Ball Valve

Technical Parameters:◎Valve Body Diameter: 1-1/4 inch NPT;◎Valve Body Material: Brass;◎Actuator Material: Engineering Plastics;◎Sealing Material: FKM and PTFE;◎Wiring Diagram: CR2-01;◎Working Voltage: 12VDC Only;◎Working Current: ≤500mA;◎Working Medium: Fluid, Air;◎Working Pressure: Max 145 Psi;◎Switching Time: ≤5s;◎Life Time: 70000 times (Testing pressure is 0.4MPa, medium is water)◎Actuator Rotation Angle: 90°;◎Torque Force: 3N.m.;◎Cable Length: 0.5m;◎Environment Temperature: -15℃ ~ 50℃;◎Liquide Temperature: 2℃ ~ 90℃;◎Switch Indicator: YES◎Manual Override: YES;◎Protection Class: IP67Application:◎HVAC;◎Water Treatment;◎Chemical Process;◎Air Compressor Drainage;◎Automatic Control System;◎Solar Hot Water Engineering;◎Watering Flowers, Regular Humidification;◎Air Conditioning Automatically Humidifies;◎Automatic Control Of Small Industrial Equipment;◎Environmental Protection, Efficient Water-saving;◎Replace Solenoid Valve (Especially when solenoid valve cannot work reliably);Manual Override Instructions:◎In case of anelectric supply failure, it is possible to operate the actuator manually.◎Power must in off position when start the manual override.◎Gently putt up the knob about 3mm, then revolve the knob around left and right to control the valve open or close.◎When the red needle in the indicator pointing to "S", means the valve is closed; When pointing to "O", means the valve is open.◎After finish the manual override operation, must press down the knob, so that for the normal electric operation.

• Power To Open and Power To Closed;
• 12VDC CR2-01 2 Wires Control 2N.m Actuator;
• 2 Way 1" NPT Reduce Bore 23mm(0.91in) Brass Valve Body;
• Limit Switches Bulid-In, Auto Cut Off Current When Arrived At Place(0Ma);
• Manual Override And Working Indicator Installed, IP67 Water Proof Actuator.