48in 125cm Manual Acrylic Bender with Bracket Angle Holder, Plastic Sheet Bender, Manual Strips Heater with Angle Adjustment, for 1-6mm Plastic Bending110V/1500W

Attention: 1. The machine should be placed in a dry, clean, ventilated position, and the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2. For safety reasons, must be connected to a reliable safety grounding device and must have three feet with ground connection. 3. The heating process leads to high temperatures, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if the machine will not be used for a long time. Recommended Temp. for Some Regular Materials: Acrylic: 410℉/210℃ Perspex: 383℉/195℃ PVC sheet: 311℉/155℃ ABS: 374℉/190℃ PET: 320℉/160℃ NOTE: Just for reference, users may modify them according to their materials and working habits.Parameters👉Acrylic Bender with Bracket&Angle Holder Voltage: 110V Frequency: 50/60Hz Power: 1500W Maximum Bending Width: 48in(1250mm) Heating Thickness: within 0.24" (6mm) Package Type: Cardboard Box Note: The cooling water temperature should not exceed 40 ℃; To ensure safety and longevity, please replace the cooling water promptly.Package Content👉Acrylic Bender Machine 1 x Heating Host with Bracket&Angle Holder 1 x Thermostat 1 x Thermometer 1 x Water pipe 2 x Heating wires (1 for use and 1 for backup) 2 x Glass tubes (1 for use and 1 for backup)

• Upgrade Function: Support Bracket and Angle Holder has been added to the acrylic bending machine; Place the heating material on the acrylic bending machine and use an electric heating wire to heat various thermoplastic materials (such as acrylic, organic board, PVC, etc.). The graduated bracket and angle bracket make their bending and forming more precise
• Ultra Long Heating Length: The total length of this acrylic PVC plastic strip heater is 49.21 "/125cm, and the heating size is 48"/121.92cm; The Heating thickness range: 0-0.23 "/0-6mm; if the thickness of the acrylic board exceeds 6mm, two heaters can be used to heat the top and bottom of the board simultaneously, or a groove needs to be cut on the board.
• Circulating Cooling Water System: The safe water circulating cooling structure is distributed on both sides of the heating tube of the plastic sheet bending machine to ensure that other components (not requiring heating positions) will not deform due to heating; So the 110V/1500W acrylic bending machine heater can easier bend various plastic sheets
• High Quality: The acrylic bend heater frame is made of special aluminum profiles, which are heat-resistant and not easily deformed; The heating wire is protected by a glass tube on the outside to prevent the acrylic board from melting; Glass tubes are fragile materials, please used with caution
• Lightweight & Practical: The PVC heater is designed to be portable, take up minimal space, consume low energy, and run reliably; Assembling onto the workbench is very convenient. The plexiglass bend can be widely used in decoration engineering, logo making, display cabinets, aquarium packaging, shelf bending, large light boxes, acrylic panels, and plastic panels.